How to Kill Bathroom Mold: 8 Methods to Try

So, it’s happened. You’re in the shower and you spot it — mold. What do you do now? It’s tricky to know how to kill mold in a safe way and make sure it doesn’t come back. Luckily, there are several ways to ensure your apartment is clean and mold-free. Here are multiple ways you can kill mold.

Understanding what causes mold

Before you can kill the mold in your apartment, you have to know what caused it. Mold can occur in a couple of different ways:

  • Lack of or poor ventilation that causes moisture to linger in the air
  • Faulty plumbing like leaking sinks, faucets or drains
  • Damp materials like rugs, towels, wallpaper, grout or drywall that never completely dry

These are the most common ways mold forms in your apartment. Now that you understand the different ways mold can grow, you can identify what caused the mold in your apartment and choose the best tip to prevent and kill it.

How to kill mold in your apartment

It’s recommended that if the affected, moldy area is larger than 10 feet or if you notice mold is growing in your apartment’s insulation, you should call a professional. However, if it’s a small area and the mold is already there, you need to get rid of it.

Here are some mold-prevention tips to make sure mold never inhabits your apartment and living space again.

1. Use or install a bathroom fan

bathroom fan

Use the bathroom’s ventilation fan while you bathe and leave it on for 30 minutes after you get out. If you don’t have a ventilation fan, think about installing one. The fan can help suck the moisture out of the air so it doesn’t linger and lead to a mold infestation.

Another tip on how to kill mold is to keep down the humidity in your home. Fans and dehumidifiers can help improve ventilation in the space, therefore reducing moisture that can cause mold.

2. Organize your bathroom products

shampoo bottles

Yes, organization can actually help keep your space safe and mold-free.

When you leave things like shampoo, body soap and bath toys on the side of the shower without ever removing them, water gets stuck underneath allowing mold to grow. By frequently adjusting their placement and cleaning underneath them weekly, you can reduce the risk of mold growth in your bathroom.

3. Apply tea tree oil

tea tree

Not only does tea tree oil have a nice smell, but it’s also a great way to get rid of and kill bathroom mold. Simply mix one teaspoon of oil and one cup of water. You can either pour the mixed solution into a spray bottle or pour it into a bowl and dip your scrubber into it. Scrub the moldy area with the mix to remove the mold.

Once the area has been cleaned don’t rinse it with water as it’s best to let the mixture sit to prevent future mold from growing. Note, when buying tea tree oil for mold removal, make sure it contains melaleuca alternifolia in the ingredients.

4. Clean with vinegar

vinegar

Vinegar is an effective, non-toxic way to get rid of mold. If you go with this method, here’s how to use it. Pour white vinegar into a spray bottle and make sure to not dilute it with water. Spray the affected area with the vinegar and let it sit for one hour.

If you have windows in the area you’re cleaning, it’s best to leave them open for ventilation. After an hour, use hot water to wipe the area clean. Finally, dry it off completely as mold thrives in damp places.

5. Use baking soda

baking soda

Baking soda is another option if vinegar isn’t for you. Not only does it kill mold but it absorbs moisture. This is a great option if you have pets as it isn’t harmful to animals.

Mix a quarter of a tablespoon into the water and pour it into a spray bottle. Spray the area and scrub the mold away, then rinse the area with hot water. Finally, you can spray the area again and let it dry to prevent future mold.

6. Sanitize with bleach

cleaning with bleach

Bleach is a good way to get rid of mold on nonporous surfaces, however, it’s not recommended to use bleach on surfaces such as wood. Make sure when using bleach that you take all the safety precautions, such as wearing gloves and having proper ventilation. Remember to never mix bleach with any other cleaning solution as it can cause toxic fumes.

The most effective way to use bleach to kill mold is to mix one cup of bleach with a gallon of water. Spray it onto the affected area, let it soak and scrub that nasty mold away. When you’re done, rinse the area down and dry it completely.

7. Scrub with borax

scrubbing with borax

Borax can be found at most grocery stores in the laundry detergent aisle and is a great option to get rid of and kill most molds in your bathroom. Mold Help for You has a great recipe for a borax solution to kill mold that’s easy-to-make and effective.

8. Clean using hydrogen peroxide

hydrogen peroxide

Hydrogen peroxide is easy to find and easy to use to kill mold. All you have to do is spray the area with it and let it sit for 10 minutes, then scrub the area and rinse with hot water.

Getting rid of mold for good

Mold is never a welcome guest in your home or bathroom. But with these cleaning solutions and tips on how to kill bathroom mold, you’ll be prepared and ready to attack and kill next time it strikes.

The post How to Kill Bathroom Mold: 8 Methods to Try appeared first on Apartment Living Tips – Apartment Tips from ApartmentGuide.com.

Source: apartmentguide.com

How To Clean An Iron To Make It Look Brand New

Cleaning an iron is a household task that’s easy to forget about. However, with all the shirts to press, sheets to smooth and pants to unwrinkle, it’s no wonder our irons get worn out. Giving your iron the TLC it needs can be simple and way cheaper than opting for a newer model.

There are many different ways to clean and shine your iron using some elbow grease and a few items you may already have in your home. Keeping your iron clean is necessary to keep the chore easy and productive, so check out these tips to clean an iron without any fancy cleaning products required.

1. Clean with baking soda

Baking soda is used to clean almost anything, whether it’s your household appliances, fruits and veggies or your iron. You can create a stain-fighting paste using two tablespoons of baking soda mixed with one tablespoon of warm water. Gently rub the paste on a cool iron plate, coating areas that have mineral deposits. Wipe the paste off using a damp cloth.

Pro tip: Avoid getting the paste in the iron’s steam holes. If you manage to get it in there, use a damp cotton dipped in distilled water or a wooden toothpick to clean it out.

2. Clean with sea salt

person filling up water tank in an iron

Believe it or not, using salt to clean your iron can get the job done. Turn your iron on the hottest setting and lay out a brown paper bag or newspaper on your ironing board. Sprinkle a generous amount of salt over the paper bag or newspaper and begin to iron the salty surface. Continue this process until the salt takes away all the dirt on your iron. After this, wipe the salt residue away with a damp cloth.

Pro tip: Iron in circular motions to maximize the amount of dirt you take off.

3. Clean with a towel and vinegar

If your main issue with your iron is corrosion, the towel and vinegar trick will make it look good as new! Soak a towel in vinegar and then set the iron onto the towel with the soleplate facing down. Let the iron sit in the vinegar-soaked towel for 30 minutes before wiping it down.

Pro tip: Place your soaked towel in a bin or other container to avoid vinegar seeping into unwanted areas.

4. Clean an iron’s steam holes

person steaming their iron

A common problem with dirty irons is the steam holes getting clogged. A good indication of some much needed cleaning is when the iron sputters and leaves mineral-filled or rusty water spots on clothing. Mix ½ cup of vinegar and ½ cup of distilled water into the iron’s reservoir and inspect the steam ducts in an upright position.

Use an old toothbrush, wooden toothpick or cotton swab to clear away build-up. Test the iron by heating it up and depressing the steam button until the steam flows out freely. Let the iron cool before pouring out the mixture into the reservoir.

Pro tip: Never use metal to clean the soleplate of your iron as this could scratch or damage it.

5. Clean with nail polish remover

Not only does nail polish remover clear away nail polish, but also the gunk on your iron plate! Heat up your iron and dip a cotton ball into some acetone nail polish remover. Use a heat-protecting glove like an oven mitt and wipe the cotton ball along the surface of the hot iron. This method helps dissolve any unwanted residue on your iron. Let your iron cool and wipe away excess nail polish remover.

Pro tip: Perform this cleaning method outside so that your household doesn’t breathe in the strong chemical fumes.

6. Clean with paracetamol

An unusual yet excellent hack for cleaning your iron (especially with burnt residue) is paracetamol (like Tylenol). In fact, any acetaminophen tablet will do. First, turn your iron on the highest setting. Once the plate is hot, use an oven mitt or other heat-protecting glove to press the pill directly onto the burnt area of your iron. The pill should melt into a gel which then dissolves the burnt spot on your iron. Use a damp cloth to clean the soleplate and repeat if necessary.

Pro tip: Don’t use tweezers or pliers to press the pill onto your hot iron. One slip could result in scratching your iron or burning your fingers!

7. Clean an iron with wax paper

someone holding an iron upright

Similar to the salt trick above, you can use wax paper with coarse salt to clean your iron. Place wax paper on your ironing board or a cutting board and sprinkle about a tablespoon of sea salt over the wax paper. Heat the iron to its highest temperature and iron the salt without applying much pressure. The residue will stick to the salt and your iron will be good as new!

Pro tip: Make sure the steam function is off while you perform this cleaning trick.

8. Clean with toothpaste

Toothpaste not only clears the plaque on your teeth but the muck on your iron as well. All you need to do is smear a small amount of white toothpaste on any affected areas on your iron’s soleplate. Leave the toothpaste there for a few minutes before wiping it away with a clean cloth.

Pro tip: Finish things off by filling your iron’s reservoir with distilled water and setting it down on a towel. Steam your iron leaving in for an additional few minutes to work through.

9. Clean with dryer sheets

Iron assisting with laundry

Dryer sheets have more uses than freshening up your drying clothes. One way to use a dryer sheet you may not have heard of yet is to clean your iron. Simply rub the soleplate with dryer sheets while the iron is on its lowest heat setting. As soon as you feel the dryer sheet get too hot, grab a fresh one. Repeat this process until the iron is clean.

Pro tip: It’s always a good idea to wear a heat-protecting glove or mitt when touching an iron soleplate. You should be fine while in the lowest setting, but be cautious.

10. Clean an iron with ice cubes

If you accidentally left your hot iron near something plastic, you probably have a bit of a mess to deal with. However, melted plastic is easy to get off an iron by using simple items like a big bowl, ice cubes and a plastic knife or spatula. Place your iron in a bowl or pan full of ice to harden the plastic. If your plastic is already hardened, you can skip this step. Now take a plastic knife or spatula and scrape the plastic away, then wipe it down with a damp rag until you feel the iron’s surface to be smooth.

Pro tip: It’s crucial to get plastic off your iron before you use it again, otherwise the plastic will melt into your garments.

How often should I clean my iron?

The answer to this question heavily depends on how often you use your iron. On average, you should make it a habit to clean your iron every other month to remove mineral deposits. If your iron begins to dull or you see any build-up on the soleplate, then you can do a quick cleanse to avoid having to do a deeper clean.

What is the black stuff on my iron?

someone wiping down their iron

Most people notice their iron is dirty when they see “black stuff” on the soleplate. The “black stuff” you see is a result of burn marks, dirt, dust, spray starch and fabric fiber buildup. Additionally, if you leave water inside your iron, it could begin to rust cause rusty spots. It’s important to maintain your iron to avoid it from damaging or ruining your clothing.

Maintaining a clean iron

To maintain a clean iron, there are a few things to consider. First, try using distilled water rather than ordinary tap water in your iron. Tap water contains minerals which over time results in rust and mineral build-up. Another consideration to avoid rust and mineral build-up is to make sure you empty the reservoir and place it in an upright position before storing it in your laundry room.

To keep your iron’s soleplate sleek and shiny, never iron over metal zippers, buttons, snaps or any other decorative item. The plate will last much longer and keep your iron maintenance low. Maintaining an iron may seem low on the to-do list, but it’s a great laundry hack that will save you a lot of time in the long-run.

The post How To Clean An Iron To Make It Look Brand New appeared first on Apartment Living Tips – Apartment Tips from ApartmentGuide.com.

Source: apartmentguide.com